Results 1 to 16 of 16
  1. #1
    Member TideChaser's Avatar
    Join Date
    Jan 2011
    Location
    Hamilton
    Posts
    1,047

    Dual mount for 2 front fish finders for PIV?

    I currently have a single Garmin 93 for my front graph. I just bought another Garmin 93 to add to the front for a dedicated livescope. What are some dual graph mounts that you would recommend? I'm not trying to spend a fortune on one and I plan on mounting it inside the recessed cutout.

  2. Member
    Join Date
    Jul 2004
    Location
    Toronto, ON
    Posts
    542
    #2
    Installed a str8up mount on my cougar
    Was the less expensive of all the mounts I searched

  3. BBC SPONSOR Bass Cat Boats's Avatar
    Join Date
    Jul 2004
    Location
    Mountain Home
    Posts
    15,041
    #3
    We like the dual pedestal BalZout mount with varying arm lengths.

  4. Member Topwater All Day's Avatar
    Join Date
    Feb 2007
    Location
    El Dorado Hills, CA
    Posts
    776
    #4
    If your on a budget, the Precision Sonar PMS mount is a great option. I've been running it on the front of my PII for over two years now and it works really well. I also like it because I can adjust it easily and also remove it quickly. Works with the larger RAM mounts and you can get the wrench from RAM to lock it down really tight. I just hand tighten mine though...

    Double Stack-3.jpg Double Stack-4.jpgDouble Stack-5.jpg
    Rob Ridge
    www.folsombassteam.com
    2018 Nitro Z19 Pro, 200 Mercury Pro XS


  5. Member
    Join Date
    Dec 2016
    Location
    Blaine, MN
    Posts
    1,342
    #5
    Did the same as Rob with the PS mount, but built it myself for about 15 bucks.






  6. Member
    Join Date
    Jul 2007
    Location
    Mars Hill, NC
    Posts
    3,670
    #6
    You might want to check Bass Boat Technologies.

  7. Member
    Join Date
    Jan 2008
    Location
    Decatur, AL
    Posts
    3,960
    #7
    I'm using the PMS in my P2 myself. Works great!

  8. Member TideChaser's Avatar
    Join Date
    Jan 2011
    Location
    Hamilton
    Posts
    1,047
    #8
    Quote Originally Posted by Topwater All Day View Post
    If your on a budget, the Precision Sonar PMS mount is a great option. I've been running it on the front of my PII for over two years now and it works really well. I also like it because I can adjust it easily and also remove it quickly. Works with the larger RAM mounts and you can get the wrench from RAM to lock it down really tight. I just hand tighten mine though...

    Double Stack-3.jpg Double Stack-4.jpgDouble Stack-5.jpg
    What model ram mount are you using for this? I'm not sure which model ram mount I am currently using.

  9. Member TideChaser's Avatar
    Join Date
    Jan 2011
    Location
    Hamilton
    Posts
    1,047
    #9
    Quote Originally Posted by TDobb View Post
    Did the same as Rob with the PS mount, but built it myself for about 15 bucks.






    May I ask what particular materials you used and dimensions? Feel free to PM me.

  10. Member Topwater All Day's Avatar
    Join Date
    Feb 2007
    Location
    El Dorado Hills, CA
    Posts
    776
    #10
    Quote Originally Posted by TideChaser View Post
    What model ram mount are you using for this? I'm not sure which model ram mount I am currently using.
    The large one, "D" size with a 6" arm. You can do the larger or shorter arm too, but the 6" works the best for me. If you want to go with smaller graphs, like two 7" models, you could easily use the "C" size RAM mount...
    Rob Ridge
    www.folsombassteam.com
    2018 Nitro Z19 Pro, 200 Mercury Pro XS


  11. Member TideChaser's Avatar
    Join Date
    Jan 2011
    Location
    Hamilton
    Posts
    1,047
    #11
    Just looked it up. I have a Ram 111U medium size arm in the "C" size. Would this hold 2 Garmin 93 SV's?

  12. Member
    Join Date
    Jul 2020
    Location
    Southaven, MS
    Posts
    366
    #12
    I used dual BBT 6 inch pedestal mount on 2002 BC Classic.
    Attached Images Attached Images

  13. Member Topwater All Day's Avatar
    Join Date
    Feb 2007
    Location
    El Dorado Hills, CA
    Posts
    776
    #13
    Quote Originally Posted by TideChaser View Post
    Just looked it up. I have a Ram 111U medium size arm in the "C" size. Would this hold 2 Garmin 93 SV's?
    Two 9" graphs might be a little too much for the "C" size RAM mount. It will always be falling down and you won't ever be able to get it tight. I would get the bigger "D" size...
    Rob Ridge
    www.folsombassteam.com
    2018 Nitro Z19 Pro, 200 Mercury Pro XS


  14. Member TideChaser's Avatar
    Join Date
    Jan 2011
    Location
    Hamilton
    Posts
    1,047
    #14
    Thanks. So, if I buy a 111U in the "D" size I should be fine? I might be able to fabricate a plate. Anyone know what is needed for this? TDobb? If I have to spend the 100 dollars for the plate, I'll do it.

  15. Member
    Join Date
    Dec 2016
    Location
    Blaine, MN
    Posts
    1,342
    #15
    The setup I built will easily hold two Garmin 93sv units. I replied to your pm. Let me know if you need any more help.

  16. BBC SPONSOR
    Join Date
    Feb 2020
    Location
    Benton KY
    Posts
    586
    #16
    We have multiple options at different price points.

    Give us a call to discuss!

    270-703-6133