Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    Jan 2014
    Location
    Texas
    Posts
    7

    Motor not cranking

    2003 yamaha 250 hpdi not cranking when key is turned. Have power to key had starter and selnoid checked all good. Checked all fuses all good. Any suggestions?

  2. Member
    Join Date
    Jan 2019
    Location
    Houma La.
    Posts
    97
    #2
    I would definitely check out ignition switch.

  3. Member
    Join Date
    Jan 2019
    Location
    Houma La.
    Posts
    97
    #3
    Also make sure the kill switch pull out is fully engaged.

  4. Member
    Join Date
    Jan 2014
    Location
    Texas
    Posts
    7
    #4
    Have checked both, they are good. Checking neutral switch next. Thanks

  5. Member
    Join Date
    Aug 2018
    Location
    1000 Islands, Ontario
    Posts
    967
    #5
    What about the LARGE fuses on engine (30amp I think)?
    2002 Skeeter ZX200
    2018 200SHO

  6. Member
    Join Date
    Jan 2014
    Location
    Texas
    Posts
    7
    #6
    Fuses have been checked. All good.

  7. Member
    Join Date
    Jan 2019
    Location
    Houma La.
    Posts
    97
    #7
    Had this happen before, fuse checked out good but contacts ends on fuse holder were corroded. Cleaned those up problem solved.