Looking to put a jackplate on my Z18 w/ Pro XS 175, any recommendations?
IMG_4188.jpg
Looking to put a jackplate on my Z18 w/ Pro XS 175, any recommendations?
IMG_4188.jpg
Last edited by plipscomb; 05-04-2022 at 02:26 PM.
I have a 6" Z Lock manual on mine, installed by the dealer as part of my deal with them. The Nitro website lists 2 options for the Z18, a 6" manual and a 6" hydraulic so that must be the recommended size. I finally got mine set where I think I get a good hole shot and speed. A hydraulic version would have been nice in hindsight but probably not necessary for the water I fish.
I do like the Z Lock as it has 3 bolts on each side. It was also easy to mount my Power Pole brackets to it. There is also a hole shot plate made for it which I added and reduces the back wash coming up thru it during take off and shut down.
Last edited by jtrac; 05-04-2022 at 04:06 PM.
Jim
2023 Triton 19 TRX Patriot, gunmetal/carbon mist/silver mist, 225 Merc Pro XS, SN 3B265119
Thanks, Tracker Service Center in Nashville said they used 8” Slidemaster. I’m just trying to get a consensus as to what other Z18 owners have used
I bought mine from Pro's Choice and I don't think we even discussed the size. I bought the boat over the phone and I think I just said add a jack plate. They used the 6 inch version. Not questioning the Nashville store but you might want to check with Nitro to see what they say is recommended as it's possible it could affect the hull warranty. Most of the Z18 stock boats I looked at a little over a year ago, when they were much more plentiful, did not have a jack plate. Probably because dealers were trying to keep the boat at a lower price point.
Jim
2023 Triton 19 TRX Patriot, gunmetal/carbon mist/silver mist, 225 Merc Pro XS, SN 3B265119
6 to 8 - 2" don't matter much, More offset just moves the CG back.
Last edited by BMCD; 05-06-2022 at 07:49 AM.
Bryan McDonough
2023 Nitro Z21 XL
Nitro Team
The Slidemaster manual is a solid plate. Bob’s for a hydraulic plate. Check with Nitro boats proper on the size you want to make sure it is acceptable on the hull. 6” is probably all you need.
USN Retired
2020 Basscat Caracal
2020 Mercury 225 ProXS 4s
6 or 8" slidemaster would be my choice. Price and availability would be the deciding factors.
Chris
2020 Nitro Z19 Pro w/ 200 ProXS
I have a 6 inch, seems to work really well.
2019 z18 175 ProXs 4 stroke, DC, 10 Ft Power Pole Blades, Relion lithium batteries, Ghost trolling motor, Lowrance Live's, SS structure, Airmar TM150, Vessel View Link, PowerPole Charge.
6 or 8 it wont matter, no difference really.
Joe Allan
Nitro Z7 Mercury Optimax 150hp Lowrance Ghost Simrad NSS Evo 3s
Proudly Supported by: Gamakatsu/Majorcraft/Fuji/Kershaw/Samurai/Atomic