Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Jul 2007
    Location
    Mars Hill, NC
    Posts
    3,670

    Hydraulic Brake Lines

    I'm replacing the leaf springs on my 2008 P IV tandem trailer. I noticed damage and leaking on both brake lines. Are there any specs on what I should get as replacements?

  2. Member
    Join Date
    Nov 2020
    Location
    Tarheel, North Carolina
    Posts
    404
    #2
    Just go to the parts store and purchase replacement lines. If medal lines take the line with you so as to make sure you get the correct flare fitting that will go into the caliper. Rubber flex lines can be gotten the same way. If you have access to a flaring tool, that will help in the repairs.
    BassCat Puma
    250 ProXs
    Humminbird Electronic's
    Helix 12 G4
    Solix 12x2 G3
    Mega 360
    Mega Live
    Minn Kota Ultrex MDI
    Relion Batteries
    Dexter Suspension System

  3. BBC SPONSOR Bass Cat Boats's Avatar
    Join Date
    Jul 2004
    Location
    Mountain Home
    Posts
    15,098
    #3
    You can pick your preferred method, locally or by calling BCB. They can supply you with the current brake lines and replace those, or you can get the which replaced what you have now.

  4. Member
    Join Date
    Sep 2004
    Location
    Gonzales, LA
    Posts
    70
    #4
    So I pulled the wheels off yesterday. Just wanted to look at the grease fittings. Found port and starboard brake lines had been rubbing on the inner fender well. Was able to loosen and reposition where they attach to the caliper. 2021 Sabre