Results 1 to 3 of 3
  1. 04-26-2022, 10:11 PM #1
    Frharvey
    Frharvey is offline
    Member
    Join Date
    Mar 2016
    Location
    Iowa
    Posts
    30

    Powerlift cmc jackplate

    I got a powerlift cmc jackplate installed on my boat last year that needs cranked up a bit. Loosened the four outside bolts but can’t seem to get the top one to turn. Can I jack it up from the underneath bolt?
    Reply With Quote Reply With Quote
  2. PSM207
    PSM207 is offline
    Member
    Join Date
    Jun 2004
    Location
    Lebanon, Missouri
    Posts
    3,033
    #2 04-27-2022, 08:07 AM
    Quote Originally Posted by Frharvey View Post
    I got a powerlift cmc jackplate installed on my boat last year that needs cranked up a bit. Loosened the four outside bolts but can’t seem to get the top one to turn. Can I jack it up from the underneath bolt?
    Is this a hydraulic PowerLift CMC JP or a manual CMC JP?
    Allison XB-21 ProSport
    Yamaha 250 SHO
    Croxton Razor 4XL
    Reply With Quote Reply With Quote
  3. KandKKustomz
    KandKKustomz is offline
    BBC SPONSOR/ Shallow Water Anchors Moderator
    Join Date
    Apr 2015
    Location
    New York
    Posts
    10,941
    #3 04-29-2022, 01:26 PM
    may be at upper height limit. would have to move outboard up 1 set holes then go back down. re measure prop to pad or it could be just seized. If get it undone best to put some antiseize on all threads


    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »