Broke in the new boat the other day and water was coming out of the console. I believe I’ve found the culprit to be a black water pressure hose but I can figure out where the sender is to hook it back in. Does anyone have a photo or an explanation of how to correct this? Never had it happen before and there’s a lot going on in there so not sure what I’m looking for or where it is. Thank you!!
2022 21PHX
Previous boats:
2017 Phoenix 721 ProXP
2000 Triton TR186
If I'm not mistaken, it plugs directly into the back of the water pressure gauge.
2013 Phoenix 721 XP
2013 Mercury 250 Pro XS
Lowrance HDS Carbon 9 and HDS 9 gen 3
Twin 10' Talons
Either your water pressure gauge or speedometer
Thanks! Well that would explain what’s going on. I had a merc monitor level 3 installed and I’m assuming it’s not hooked up correctly. If anyone has any more advice I’d love to hear it. I’d rather just fix myself than have to take in somewhere.
2022 21PHX
Previous boats:
2017 Phoenix 721 ProXP
2000 Triton TR186
The black hose plugs into the back of a silver wp sending unit. First trip out in mine it came off and soaked leg and foot in 50 degree water.
I cut a bit off, shoved it back on there, and put a small zip tie on it.
Reply With Quote