Differences between 23 trophy plus and 24 bravo1 running on a stratos 19' 175 hp 2 stroke intruder please .
There is a bravo 1 24 in great shape at a reasonable price near me . No vent holes ?
Differences between 23 trophy plus and 24 bravo1 running on a stratos 19' 175 hp 2 stroke intruder please .
There is a bravo 1 24 in great shape at a reasonable price near me . No vent holes ?
These are my two props for my new boat, but I haven't had a chance to try the Trophy yet. The Bravo is fantastic though.
2021 BassCatt Pantera II
200 Pro XS(3B056653)
Motorguide Tour Pro
The bravo has more diameter and will probably take more power to turn given equal pitch compared. So unless you have rpm's to give up it may be to much to turn.
Thanks Sam , i understand about the vents . that prop is probably too big ,too bad rare to see those for sale around here .
If the gear ratio on the 175 is 1.87 the Bravo could work.
2020 Triton 18 TRX
Tournament Fishing Package
2020 Mercury 200 Pro XS V8 Serial # 2B588923
Minn Kota Ultrex 80# I Pilot Link
Hi Jacker EZ 6" Jack Plate
Bravo 1 FS 24 Pitch Prop
Humminbird Helix 7 SI GPS CHIRP G2 Bow
Humminbird Helix 7 CHIRP MEGA GPS DI G3 Console
Trick Step Boarding Steps
RMP Engine Support
I think it will turn just fine, but you will need to have dual PVS holes drilled.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
I will have to check if i can have those vents put in up here in canada ,might get the price up to brand new prop price .
But without the holes it would be a good test to try it out knowing that the take off will be slow to see if i can get to max rpm ?
The venting is so important on a large diameter 4 blade, That you may not even get on plane.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
The taller the pitch, The more it matters. My best holeshot dual pvs Bravo1 28P would not even get on plane with all solid plugs. Even with my 250+HP motor on my lightweight balsa wood boat. Gear ratio makes a difference too.
I have seen some guys hate an unvented prop, Then after Mark added dual pvs holes, It was their best/favorite.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Thanks guys for the help , i've decided to wait and not get that bravo . Still want to lighten the boat some and will see after that and lowering the motor how it is and see if an other prop is in the future .
Last edited by danlaboucane; 04-16-2022 at 06:31 AM.