I'm needing some help on replacing my axle on my 2000 190 DC. As far as I know its the original trailer. Does any have the measurements for this axle or know where I can find the info for it? I have no clue on how to even measure one.. Any help would be great.
Thank You Jack
"2000 Cobra 190DC, 2017 200 ProXs"
As far as I know, Viper used EZ Loader trailers, which is what mine is, so I would get intouch with them and find out what you need. At worst, take your trailer to a local boat trailer dealer, and I am sure they can give you some guidance.
Here is the company info
Trailers & Trailer Parts
TI Trailers, Inc (EZ Loader)
Midway, AR
870-481-5138
Last edited by digthemup; 04-11-2022 at 04:43 PM. Reason: spelling
Thank You I'll give them a call...
"2000 Cobra 190DC, 2017 200 ProXs"
I replaced an axle on my trailer a while back, there are a few measurements you would need in order to purchase a new one. Also, there may be some info stamped on the axle itself, my new axle has a plate on the top of the axle in the center. If you struggle to find some help, I highly recommend Marine Masters in Tullahoma,Tn. Ask for Tami, she worked for Dexter, and will have a paper she can email you, that contains all of the necessary info you would need if you were to order an axle. By the way, they were cheaper than most places I checked as well.
'99 Cobra 201D
Merc 250 Pro Xs 4 stroke
Sounds good thanks Ryno...
"2000 Cobra 190DC, 2017 200 ProXs"
Reply With Quote