-
Member
Small Hub Trophy Thrust Washer?
I have a Tempest Plus 25" that I am currently running on my Ranger with a 2000 225 Optimax, and going to try a 24" Trophy (not plus). I have the #12-835467-1 thrust washer with my flo-torque hub kit that seems to work with the Trophy. I've seen some comments that I need to run a 13191Q01 thrust washer with the small hub Trophy, any input on this is appreciated... Will I damage anything just testing the prop with the 835467? I haven't run it yet.
Heartland of America
2000 Ranger 520dvx
2000 Mercury Optimax 225 - 0T136160
--
1997 Charger 395TF
1997 Evinrude Vindicator 200 - G04296981 (E200STLEUB)
-
If you have a flo torque II hub kit just swap everything into the trophy including the thrust washer.
-
Member
The Trophy is not a flo torque hubbed prop, it's pressed in. It ran fine with the 835467 washer, but I went ahead and ordered a 13191q01, which sets the prop a bit further out from the housing so I'll see how that runs on Saturday.
Heartland of America
2000 Ranger 520dvx
2000 Mercury Optimax 225 - 0T136160
--
1997 Charger 395TF
1997 Evinrude Vindicator 200 - G04296981 (E200STLEUB)