Twin HDS Gen2 NON touch "etherneted" in line....console is the primary with the bow secondary via Ethernet
3D SS and transducer
If anyone can assist me I'd be eternally grateful.
I've spent hours scouring here and the internet to no avail, but, I've probably missed somewhere along the line. I've spent 3 or 4 hours going back and forth with Lowrance.....to no avail as of yet.
The following pics are what I'm seeing......nothing but a narrow band of "interference"/static.
The following are also pics of the info I could pull from the unit. The 4.0 is the latest/final software version, but, I'm not sure if the SS software version is current as I can't figure out what's what???
ANY assistance would be GREATLY appreciated! I just completed an 18 month/350 hour+ total renovation of my boat and the only thing left are these d@mnedable, cursed electronics.....😉
Also, as the whole bass fishing world is upgrading to FF there are any number of HDS12 GEN3's for sale all over the net for $700/$800. IF I upgrade to one of them, and, as my HDS10 GEN2 at the bow is acting as a "monitor" (as I understand it...), I'm assuming the 3D image on the HDS12 GEN3 at the console (acting as the primary) will be transferred and displayed on the HDS10 at the bow? (via the Ethernet cable to the HDS10 bow unit) Is this true?
Again, ANY assistance is GREATLY appreciated, as I'm lost as to who/where to turn for help! Lowrance hasn't really been of much assistance, at least to date......old electronics so I'm sure I'm waaaaaay down the priority list.
Feel free to PM if that's preferred.....
0329221853.jpg
0329221853a.jpg
0401221658.jpg
0401221702.jpg
0401221710.jpg
0401221710a.jpg
0401221710b.jpg
0401221710c.jpg