Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Sep 2020
    Location
    Toledo Bend
    Posts
    147

    Hydraulic steering hose replacement

    Has anyone replace their steering hoses? Pulled my motor to rechaulk the holes and accidentally kinked a hose. Assume it is going to leak.
    Viper cobra 201d
    thanks everyone.

  2. Member
    Join Date
    Nov 2013
    Location
    Hilton, NY 14468
    Posts
    4,367
    #2
    Do you see any cracks in the sheath or worse internal liner? or leaks? Hydraulic hoses are pretty flexible even surviving a 90* bent temporarily.

    Look at the stickies at the top of the forum, since there may be something there.

  3. Member
    Join Date
    Sep 2020
    Location
    Toledo Bend
    Posts
    147
    #3
    So far so good on the bend for a second at not quite 90. Going to run it till it bubbles if ever. Appreciate the response!!!

  4. Member
    Join Date
    Nov 2013
    Location
    Hilton, NY 14468
    Posts
    4,367
    #4
    Quote Originally Posted by Stropp View Post
    So far so good on the bend for a second at not quite 90. Going to run it till it bubbles if ever. Appreciate the response!!!
    Keep an eye on the reservoir filler and keep the fluid at the bottom of filler plug. You will know if anything leaks if you loose fluid.

    Best to you

  5. Member
    Join Date
    Sep 2020
    Location
    Toledo Bend
    Posts
    147
    #5
    Thank you for that tip too

  6. Member
    Join Date
    Nov 2013
    Location
    Hilton, NY 14468
    Posts
    4,367
    #6
    NP

    Tight lines

  7. Member
    Join Date
    May 2021
    Location
    Wichita, KS
    Posts
    92
    #7
    Do you guys know what model helm pump you have? Do your guys power steering fluid fill from the top of the dash?

  8. Member
    Join Date
    Sep 2014
    Location
    Oklahoma
    Posts
    798
    #8
    I have a procraft and mine is filled from the top of the driver console.