Add a dedicated battery to my Z520 to run the graphs, 2 at console and 2 at bow plus livescope. Do you install a switch type breaker in the battery compartment or something else?
Add a dedicated battery to my Z520 to run the graphs, 2 at console and 2 at bow plus livescope. Do you install a switch type breaker in the battery compartment or something else?
2016 Z520, 2018 250 Pro LPXS sn/ 2B590153, Helix 10s on bow and console, 360 bow and 112 Ultrex, 126sv and Livescope.
Son inherited - 1997 462VS 150 Johnson Faststrike, 800 series birds, side image, 110 Fortrex
That is one possibility and may be the simplest if you already have switches there you turn on and off. One issue is that breakers that are rated as switches tend to be larger than you'd need and you might need to up-size the wire to be able to use one. You can also fuse or breaker in the battery compartment and use an accessory switch at the console if you'd prefer control from there.
If you have integrity, nothing else matters. If you don't have integrity,
nothing else matters.
I am using one of theses relays in conjunction with one of the accessory switches on the my keypad. It's way overkill, but I feel that there won't be any voltage drop with it.
71-fNLXzp8L._SL1500_.jpg
https://www.amazon.com/gp/product/B0...WN6HRL8BC&th=1
2017 Ranger Z520C / Mercury 250 ProXS 2S
This style works well and used by a few manufactures on electronics. Put in the rear and easy switch off when you plug in the charger. Just get the right amperage.
Last edited by old4runner; 02-10-2022 at 06:49 PM.
This looks like a great option. Thanks
2016 Z520, 2018 250 Pro LPXS sn/ 2B590153, Helix 10s on bow and console, 360 bow and 112 Ultrex, 126sv and Livescope.
Son inherited - 1997 462VS 150 Johnson Faststrike, 800 series birds, side image, 110 Fortrex
This is the on/off switch I use to feed power to my console and bow electronics with two separate feeds. Installed in the battery compartment.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
‘22 Ranger Z520R - Mercury 250 Pro XS
Humminbird/Minn Kota One Boat Network
This is how I rigged my electronics to the 125ah start battery. BEP 701S mini switch. I chose the 4 way because the terminals are smaller (5/16”) and better suited for 8awg wire terminals. The 701 I installed a Blue Sea battery post mounted 30a fuse. https://www.hodgesmarine.com/blu5191...All%20Products
This will enable me to add a dedicated electronics battery when after removing the oil tank in a year or two.
Just move the COM wire on the switch.
B9F9C851-74F5-420C-873F-C591EBCFFF28.jpeg 83C1330D-CCE8-4C4C-81CD-78999CB5C0EC.jpeg Ranger was using a BEP 701S when I installed my main power 4way switch a couple years back. They have a small footprint compared some other switches. https://www.bepmarine.com/-/media/in...20191030114251
F59C9EC6-5E6C-4F8F-89BA-C4A926856128.jpeg4E9E535C-B736-4FDB-9C1F-106AE58B2CA6.jpeg
Last edited by RazorCat; 02-17-2022 at 09:57 AM.
BassCat Sabre FTD
Mercury 150 Optimax
"It's just fishing"
Blue Sea 5511e. Switches cranking and electronics batteries on/off at the same time, still keeping them separated. Can combine for jump starting if needed. It's pretty big though.
2021 Gator Trax 21' Strike Series
Mercury 250 ProXS #3B134663
Battery disconnect on/ off switch we have them available $25.00. We also sell the 18 inch positive battery wire that goes from switch to battery positive, marine grade tinned copper 6GA with the proper ring terminal ends $10.00. Each unit should be fused individually so no need for a breaker.