Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Feb 2012
    Location
    East York
    Posts
    77

    Elite Ti2 problem

    I have a Lowrance Elite Ti2 9" sonar with a old (2010) Navionics Gold card.
    I had this card previously in my old Gen 1 HDS8. When I first bought the Ti2 I installed the Navionics card into it and used it for almost 2 years without any problems.
    Last summer while on a fishing trip I powered up the Ti2 and the GPS mapping display looked a bit different. The contours were displayed in normal 1' details when zoomed to my normal display however when I zoomed out there was no more fine detail. Another thing I notice was there were no more red and green navigation buoys displayed on the screen. I thought maybe a setting on the Ti2 got buggered up but going through each menu and setting feature I couldn't figure out what changed or how to get everything back to how it was before it changed.
    Any help from anyone that experienced anything similar?

  2. Member
    Join Date
    Nov 2019
    Location
    on Lake Hartwell in Westminster, SC 29693
    Posts
    737
    #2
    make certain you have the correct chart chosen in your settings, you may be looking at the included basemap and not the charts on the card

  3. Member
    Join Date
    Feb 2012
    Location
    East York
    Posts
    77
    #3
    It is selected to use the data from the Navionics card as the source