-
Mercmonitor 2 stroke to 4 stroke
I've got a 2018 mercury 250 pro xs 2 stroke ser#2b532905,I'm putting a 250 pro xs 4 stroke on the boat. Will my mercmonitor connect right up, or do I need some type adapter cable for the 4 stroke
Thanks for any help
Last edited by nowakezone; 01-22-2022 at 04:21 AM.
-
Yes, it will read the PCM in the new engine. Don can confirm whether you need a different harness.
_______
Phil
'09 Hewescraft ProV
'09 150 Optimax
-
Mercury 3L/4 Stroke/Verado Moderator
Should be able to utilize the same harness, though you WILL need to alter the engine-end of the connector (when you're ready to hook Smartcraft up, drop me an email for details, it's quite simple).
Reset to Factory Defaults is advised (then setup for the new engine).
ONE NOTE: There is only ONE tank input on this engine (tank-2 is reserved for "Water in Fuel").
-