does anybody have any suggestions or video on cutting corners on carpted deck lids?
does anybody have any suggestions or video on cutting corners on carpted deck lids?
Great corner cutting vid! The only thing I would add is clamps and some wood. Thicker strips of wood are needed or they can bow a little at the corners.
IMG_20200305_200205850.jpg
IMG_20200305_200226353.jpg
If you use contact cement there is no need for wood, clamps, weight, etc. Every boat I've done I used the contact cement and they have held up great. It allows you to knock out the lids super quick with minimal wait time.
Joe Galada - Tamaqua, PA
2004 Ranger 521VX - Yamaha 250 SHO
Thanks