App won’t let me update, gives me a technical issue updates are temporarily disabled message, anyone if this temporary or should I update manually? Thanks
App won’t let me update, gives me a technical issue updates are temporarily disabled message, anyone if this temporary or should I update manually? Thanks
Been that way for a while. Maybe 3 months?
Tell me where has a slow movin' once quick draw outlaw got to go
Humminbird disabled the app update function because of issues they were having with it.
---> Regards, Steve Yarbrough (AKA: SLYDoggieTN on YouTube)
- Apex 19/16/13, Mega 360, and Mega Live
- Minn Kota Ulterra Quest Trolling Motor
- (2) Cannon Optimum Bluetooth Downriggers
- Impulse Lithium Batteries... 36V 60AH for Trolling Motor, (2) 12V 120AH for Cranking & Electronics, 12V 60AH for Downriggers
Thanks
They better hope they don’t create another card reader bug/update
I had one of the Solix 10’s that got the update that killed its ability to read the SD cards and the only way to do the update/fix was with the FishSmart app
Took more than 3 hours for that update to load using the app
"The handicapped angler"
This sucks because my Solix 10 won't read the SD cards in either slot. Won't read a map chip either. I just got my mega live and can't use it unless I move my 12 to the front.
"The handicapped angler"
Figures. Is this a known issue with the last update?
NO, There is no known SD problem on the last Solix update
Tell me where has a slow movin' once quick draw outlaw got to go
I forget what update it was but it was at lease a couple updates ago
and it only effected the 10" Solix
"The handicapped angler"
Update 3.890 had the bug and it was update 3.900 that had the fix for the issue with the 10's
"The handicapped angler"
Yep, my last update was 3.890. Guess I will be making a call tomorrow.
If you have integrity, nothing else matters. If you don't have integrity,
nothing else matters.
What is the normal turn time for the units?
They have a very fast turnaround most times they take a couple days and its an its way back to you
"The handicapped angler"
Here is something I didn't notice before and may help you fix your issue
I have the 3.900 but I would try the latest update it might have the fix in itThe only difference between 3.900 and 3.890 is a fix for SD card readers issues on the SOLIX 10 “G1”.
•If you are already running 3.890 on a SOLIX 10 G1, you will have to insert two SD Cards into the SOLIX 10 at the same time before boot time to work around the issue.
•One card must include the 3.900 update
•Install the 3.900 update from the Files Tool on the Home Screen.
Wish I would have seen that back then
"The handicapped angler"
Thank you for that information. I will give it a try.
Using two chips at the same time worked like a champ. The update is good. I will see if it reads just a map chip later. Dang storm came through.
"The handicapped angler"
Way to go Roy! This is how it is supposed to work. Sharing info and experience. Nice.
Tell me where has a slow movin' once quick draw outlaw got to go