360 quick disconnect bracket

[dannov5]

Just saw an advertisement for a quick disconnect mounting bracket for the 360 transducer. Big Rig Bassin is the company. Does anyone have any experience with one of these?

I think it's a great idea, but for $400 I'd like to know of any reviews that may be out there. Thanks!

[Wayne P.]

You can do an Ultrex quick disconnect/remount for about $496 cheaper. Replace the two outside bolts with knob bolts and slightly loosen the inside one. AND you won't lose the depth or direction setting like with that bracket. I think it is a bad idea.
Some pros use sonar unit gimbal knobs for that, I have these--

[CatCanDoo]

Wayne, where did you get these? I would like to purchase some but not sure what size and where to get them.

[Wayne P.]

Wayne, where did you get these? I would like to purchase some but not sure what size and where to get them.

Lowes

[haus9393]

solix gimbal knobs will work as well if you have those, that is what I used to use.

[201pro]

I just keep a 3/8 nut driver in my console.
takes about 60 sec to can pull mine off , disconnect the cables and store it in my strb rod locker.

[fishnfireman]

I just keep a 3/8 nut driver in my console.
takes about 60 sec to can pull mine off , disconnect the cables and store it in my strb rod locker.