Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    Jan 2012
    Location
    greenbrier TN
    Posts
    1,670

    Mounting Battery Charger

    I have two battery chargers in my boat a 4 bank for the cranking and three trolling motor batteries.
    I also have a Lithium house battery to run my electronics with a dedicated charger. I just installed
    Power poles on my 721 and I placed the pumps where my dedicated charger was. I was thinking about
    mounting it to the underside of the battery compartment lid.

    Any Ideas good, bad ?
    Mike
    2019 Phoenix 721 pro xp

    Mercury 250 pro xs
    2B575862

  2. BBC SPONSOR / PHOENIX MOD DREWTICK's Avatar
    Join Date
    Mar 2014
    Location
    Vass, NC
    Posts
    7,827
    #2
    what single bank are you using?
    Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
    910-722-0001 call or text
    info@drewcraft.com

  3. Member
    Join Date
    Jan 2012
    Location
    greenbrier TN
    Posts
    1,670
    #3
    Quote Originally Posted by DREWTICK View Post
    what single bank are you using?
    minn kota precision mk110pc
    Mike
    2019 Phoenix 721 pro xp

    Mercury 250 pro xs
    2B575862

  4. BBC SPONSOR / PHOENIX MOD DREWTICK's Avatar
    Join Date
    Mar 2014
    Location
    Vass, NC
    Posts
    7,827
    #4
    there is a small pocket where I mount my NOCO one banks, have done this in a few boats, the Minnkota may fit there

    chargers2.png
    Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
    910-722-0001 call or text
    info@drewcraft.com

  5. Member
    Join Date
    Jan 2012
    Location
    greenbrier TN
    Posts
    1,670
    #5
    thanks for the help I'll go see if it will fit.

    Quote Originally Posted by DREWTICK View Post
    there is a small pocket where I mount my NOCO one banks, have done this in a few boats, the Minnkota may fit there

    chargers2.png
    Mike
    2019 Phoenix 721 pro xp

    Mercury 250 pro xs
    2B575862

  6. Member
    Join Date
    May 2018
    Location
    Fayetteville, AR
    Posts
    186
    #6
    Are you guys predrilling the holes and using pointed stainless screws? Or should I use self tap screws to go through the metal behind the fiberglass?

  7. BBC SPONSOR / PHOENIX MOD DREWTICK's Avatar
    Join Date
    Mar 2014
    Location
    Vass, NC
    Posts
    7,827
    #7
    Quote Originally Posted by jmcarrol View Post
    Are you guys predrilling the holes and using pointed stainless screws? Or should I use self tap screws to go through the metal behind the fiberglass?

    better drill it as close to the right size as possible to keep from snapping the stainless screws and still tighten by hand
    Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
    910-722-0001 call or text
    info@drewcraft.com