Need recommendations for small bits to modify some do it jig molds.
Need recommendations for small bits to modify some do it jig molds.
Small and very small ball bits
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Probably both. Want to enlarge hook openings and bait keeper.
Originally Posted by Toby
Bait keeper almost needs nothing more than putting it where you want it with hook installed first and close the mold tight in a vise. Not so much to bend/warp the mold.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
X2. That’s what I was going to recommend. That’s how I make small adjustments and add wire weedguard slots.
This is what I use to do the same modifications that you want to do when using a larger hook than the mold will fit. I barely touch the cavity of small jigs lightly with only the very tip of the bit for small jigs. For me it's usually not the larger hook eye diameter, it's the slightly longer neck between the eye and main shaft. I elongate the eye cavity slightly, opposite of the neck end.
https://www.homedepot.com/p/Dremel-1...9903/202263217
Last edited by smokewagon; 01-21-2022 at 07:35 AM.
2012 Stratos ChampioN 183 Elite
Mercury 175 ProXS
on your way by a dentist, hit your dentist up for a couple old bits ... years ago I was lucky and got a small box all different styles. they have helped on my epoxy molds
2006 RANGER 519VX
200HP MERCURY OPTI-MAX
Sole member of " THE FISHERMEN FOR LIFE" a fisherman that knows one can make the difference!!
Just by a pack of different sizes in diamond tipped curving set. Found them on eBay for like 7bucks.
Reply With Quote
.jpg)