Results 1 to 4 of 4
  1. #1
    Banned
    Join Date
    Apr 2014
    Location
    Winston-Salem, NC
    Posts
    871

    Mounting aftermarket console between seats on a 2006 294 pro xl

    Mounting a small basscat AM console between the seats. I know the gas tank is under the seats (according to the sticker on the boat). How could i mount this? Anyone installed an aftermarket console/coin box before?

  2. Forensicator Javelin389's Avatar
    Join Date
    Jul 2004
    Location
    Lebanon, TN
    Posts
    12,754
    #2
    Here's a decade-old thread on this that will tell you how the originals were mounted in the 200/201's. Most of the pics are gone, but there is one on page 2 that shows the original box. Boxes used a slot in the seat back panel that a short tab pushed in to, then there is a nut below the front of the box for a thumb screw. For boats without the slot/nut, consensus is screws thru the bottom of the box into the panel the seats are bolted to. Problem is finding the right length of screw.
    '05 Stratos 200 ProXL, '05 Evinrude 225HO

  3. Banned
    Join Date
    Apr 2014
    Location
    Winston-Salem, NC
    Posts
    871
    #3
    Quote Originally Posted by Javelin389 View Post
    Here's a decade-old thread on this that will tell you how the originals were mounted in the 200/201's. Most of the pics are gone, but there is one on page 2 that shows the original box. Boxes used a slot in the seat back panel that a short tab pushed in to, then there is a nut below the front of the box for a thumb screw. For boats without the slot/nut, consensus is screws thru the bottom of the box into the panel the seats are bolted to. Problem is finding the right length of screw.
    Do you have that link to the thread?

  4. Forensicator Javelin389's Avatar
    Join Date
    Jul 2004
    Location
    Lebanon, TN
    Posts
    12,754
    #4
    '05 Stratos 200 ProXL, '05 Evinrude 225HO