Dumb newbie question: 2012 sho 26 fury

[mram10us]

I have no idea which hub setup, washers, etc that I need to get this 26 fury to work on my '12 sho. Help please. Thanks

[chucky6153]

You need hub kit 835274q1. Google it and it comes up. I put a tempest plus on my 2020 SHO and I used this hub kit. Hope that helps

[mram10us]

You need hub kit 835274q1. Google it and it comes up. I put a tempest plus on my 2020 SHO and I used this hub kit. Hope that helps

Definitely helps. Thanks. I googled and found two. One was a bad link and the other was a quicksilver 8M0075402 Flo-Torq II Hub Kit Yamaha. Good old amazon. Here on tuesday

[BASStard6344]

Not an expert here but I see Nampa is at 2600’ elevation the two props your looking at might be a little much? Again by no means do I understand props and elevation, but it might be something to consider .

[mram10us]

Not an expert here but I see Nampa is at 2600’ elevation the two props your looking at might be a little much? Again by no means do I understand props and elevation, but it might be something to consider .

You are spot on. Both were sent to mark to get worked for this application. Appreciate the advice though. Still learning