Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Dec 2021
    Location
    Oak Ridge, NC
    Posts
    2

    Trolling motor shaft length for 2021 Vexus 1980CC

    Any recommendations for trolling motor shaft length on Vexus 1980CC
    Thinking 54" but wanted to hear what everyone else is running.

  2. Member
    Join Date
    Mar 2015
    Location
    Georgia
    Posts
    1,911
    #2
    so im running the 50" Garmin force on a 2180cc. Its a bit short but I haven't had too much an issue yet. its the one nexus supplied with the boat. they offered to replace it with the longer one but I think its going to work. I hope im not wrong in the long run - I decided to keep I as I just didn't want something sticking up 6-8" past where this one does.

  3. Member ifishinxs's Avatar
    Join Date
    Jul 2015
    Location
    Southern Utah
    Posts
    6,403
    #3
    50 inch Garmin here as well. No issues so far
    2024 Phoenix 818, Mercury 175 (3B414035) Trick Steps, 3 Garmin 106 SV,s, LVS 34. BoatEFX dual bow mount. Ionic 12V 125AH, 2 12V 100 ah LiTime’s for the TM. Minn Kota 345 PCL charger,

  4. Member
    Join Date
    Sep 2010
    Location
    Prunedale, CA
    Posts
    933
    #4
    54" Terrova. No issues at all.

  5. Member
    Join Date
    May 2012
    Location
    Northeast
    Posts
    124
    #5
    I have a 1980CC and I'm running a 60" Terrova Riptide. I ordered the longer size because the BT iPilot Link was not offered on the 54". Plus, I'll be fishing in the Bay bobbing up/dwn like a cork (w/ big waves) and I don't want the TM to lose contact with the water- which would happen with anything shorter than 54" shaft in its full down position.
    2022 Vexus AVX 1980CC
    2022 Merc 150 Pro XS