Guys, I am looking for information. the boat has a 150 yamaha hpdi on it running 58 mph with a 23 power tech minimal lift. looking for information on a new prop that will get more lift. rpm's are 6200. thanks for any help.
Guys, I am looking for information. the boat has a 150 yamaha hpdi on it running 58 mph with a 23 power tech minimal lift. looking for information on a new prop that will get more lift. rpm's are 6200. thanks for any help.
4 Blade, PT TR-04 ~ Plenty of lift
My X-19's did really well with a PT TR-04 25P, but that was on a V-Max 200
Coonnasty
Cajun Navy 2016
2000 X21 DC, 225 EFI
The x hulls respond well to 4 blades like Coon says. Trophys always worked well. I love the Croxton 4XL on mine. You won't ring every last MPH out of it but if you wanted to do that you should have bought a glass hull. CJ
2002 X19 200HP OX66 HO Vmax,HPDI lower, it lives, thanks Hydro Tec.
Not looking at top end speed. I just came out of a 2008 ranger z520 that would run 74 loaded. I will give the 4 blade a try. thanks
I have the same boat. When I bought it I ran all kinds of different props on it. I spent a summer beachfront vacation on props lol. I narrowed it down to a power tech Tro4 23. 5900 rpm. At 58. Now I have so much fishing gear in it 55 is all she will do lol. But I’m only concerned about fishing not racing. Normally keep it at 45.
Thanks I love the boat spent over 2 years looking for one on a dual axle trailer, ran into this one with only 67 hrs on the motor. I will pick up the Tro4.
Right on, keep us posted on how it turns out.
Coonnasty
Cajun Navy 2016
2000 X21 DC, 225 EFI