What kind of wood will do for bunk boards? Pressure treated is not good for aluminum.
What kind of wood will do for bunk boards? Pressure treated is not good for aluminum.
I have PT on mine, and wrapped them with the vinyl wrap (Caliber). The boards won't rot, and the boat loads and unloads much easier.
A high grade of Cypress so it has very few knots.
USN Retired
2020 Basscat Caracal
2020 Mercury 225 ProXS 4s
I used regular clear pine. Made sure it was straight and DRY then painted it with a waterproof paint (several coats). Topped with 1/2" Starboard for slippy launch and retrieve. I quit using carpet wrap a number of years ago. The carpet just holds water and potentially invasive species larvae/spores and acts like a grow house for fungus which will rot almost any wood product. My bunks now air dry quickly and look to be in good shape 3+ years and counting.
Joe B
2017 Tracker PT 190 TX
2017 Mercury 115 Pro XS
Mercury Spitfire X7 19” prop
51 mph @ 6240 rpms (RPMs from Vessel View Mobile) : full fuel tank and fishing load by myself
4.2 second Hole Shot (measured using Vessel View Mobile)
Engine mounted in 3rd hole
Minn Kota Ulterra-Link w/built in MDI 80 lb thrust 60” shaft
Humminbird Helix 12si Gen1 chirp on console
Humminbird Helix 15si Gen4 cho on bow
Humminbird Mega360
Dotline two step transom boarding ladder
Tracker trailer bow boarding step
https://www.sunbeltfp.com/lumber-tre...tions/ecolife/
"
- Can be used in direct contact with Aluminum
"
https://www.lowes.com/pd/Severe-Weat...Lumber/4564608