Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Aug 2006
    Location
    Lino Lakes, MN
    Posts
    1,313

    Can the Livescope All-In-One cable harness work with the Ultra 106sv?

    I currently run an Echomap 93UHD in my Livescope bundle and it uses the All-In-One cable harness (‎010-12676-40)

    I just purchased an Ultra 106sv to upgrade my Livescope bundle, can I use the same wiring harness with it? I ask because the Ultra 106 draws more power than the 93UHD and I believe the stock power cords are different part numbers?

    I read somewhere you can, but you need to upgrade the fuse due to the higher amp draw? Looking for confirmation.

    thanks!
    2013 Skeeter MX1825 with Yammy F150 & Garmin Ultra 106sv & LVS34 Livescope

    "My hotfoot pedal goes to 11"

  2. Lowrance/Garmin/GPS Moderator fishin couillon's Avatar
    Join Date
    Jun 2004
    Location
    Pineville, La
    Posts
    33,120
    #2
    I think i used the power cable from my 93 for my 126....just change to the correct fuse size.....
    YOU are not entitled to what I have earned!!!!!

    2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS

  3. Member
    Join Date
    Jul 2017
    Location
    Gilbertsville, Pa
    Posts
    529
    #3
    I ran into this situation just yesterday. The power cable is the same although the fuse is different. Just swap the fuses and you will be good to go.

  4. Member
    Join Date
    Aug 2006
    Location
    Lino Lakes, MN
    Posts
    1,313
    #4
    Thanks guys!
    2013 Skeeter MX1825 with Yammy F150 & Garmin Ultra 106sv & LVS34 Livescope

    "My hotfoot pedal goes to 11"

  5. Member KCLOST's Avatar
    Join Date
    Sep 2006
    Location
    Pleasant Valley, MO
    Posts
    1,982
    #5
    Post Deleted....
    Last edited by KCLOST; 11-29-2021 at 09:51 AM.
    Layton Strong
    Nitro State Team