Results 1 to 11 of 11
  1. #1
    Member
    Join Date
    May 2011
    Location
    Trenton, Ontario
    Posts
    71

    2013 Z9 - Trailer Actuator Access Cover

    Afternoon, everyone

    After my last "unicorn" search for a part, I'm going to try my luck again with our board community and hope that someone has one of these.

    I'm looking for the plastic access cover part # 48984. I contacted Tie Down Engineering and Nitro, both with no success. Any chance that someone possibly has one in stock? I have attached a diagram of the plastic cover below (it is part # 2 on the arm).

    Hope you guys can assist once again.

    Thanks
    Attached Files Attached Files
    2013 Z9
    2023 250 Mercury Pro XS
    Minn Kota 112 lb Ultrex
    Lowrance HDS 12 Live console
    Lowrance HDS 9 Live bow (with Active Target)
    Lowrance HDS Carbon 9 bow

  2. Moderator Fishysam's Avatar
    Join Date
    Oct 2016
    Location
    Jamestown North Dakota
    Posts
    9,318
    #2
    I guess I don't mind mine being open. The clear plastic is not very stable in sunlight. I believe the new ones are black and I would bet it's the same size so maybe take one of them?

  3. Member
    Join Date
    May 2011
    Location
    Trenton, Ontario
    Posts
    71
    #3
    Hi, Fishysam - sure, I'd take any colour :), however, I can't even find that - do you know a source for one? Thanks
    2013 Z9
    2023 250 Mercury Pro XS
    Minn Kota 112 lb Ultrex
    Lowrance HDS 12 Live console
    Lowrance HDS 9 Live bow (with Active Target)
    Lowrance HDS Carbon 9 bow

  4. Member
    Join Date
    Mar 2014
    Location
    Louisiana
    Posts
    1,381
    #4
    I just put a peace of black gorilla tape over the hole. It's been on there far a few years now.

  5. Moderator Fishysam's Avatar
    Join Date
    Oct 2016
    Location
    Jamestown North Dakota
    Posts
    9,318
    #5
    Quote Originally Posted by Pepe.Parisien View Post
    Hi, Fishysam - sure, I'd take any colour :), however, I can't even find that - do you know a source for one? Thanks
    Walk into your local dealership and don't leave until they order you one, don't pay for it till it comes in. Or get one off their in stock boats. Haha this time of year I think I could get one from my dealer right then and there

  6. Member
    Join Date
    Apr 2019
    Location
    Somerset, Pa
    Posts
    608
    #6
    Try waymire distribution very good guys there.
    2019 Nitro Z19
    200 HP Mercury Pro XS 4s

  7. Member
    Join Date
    May 2011
    Location
    Trenton, Ontario
    Posts
    71
    #7
    Hey, Steinybass - you win :) - the fella's at Waymire were great - they had four in stock and I grabbed two. Thanks for the heads up on them - appreciate your help!!!!
    2013 Z9
    2023 250 Mercury Pro XS
    Minn Kota 112 lb Ultrex
    Lowrance HDS 12 Live console
    Lowrance HDS 9 Live bow (with Active Target)
    Lowrance HDS Carbon 9 bow

  8. Member
    Join Date
    Apr 2019
    Location
    Somerset, Pa
    Posts
    608
    #8
    No problem glad I could help.
    2019 Nitro Z19
    200 HP Mercury Pro XS 4s

  9. Member
    Join Date
    Jul 2016
    Location
    Monroe, NC
    Posts
    79
    #9
    I also have been on a wild goose chase for this exact same part. I’m a little late to this party so does anyone have a source to get one now?

  10. Member
    Join Date
    Apr 2019
    Location
    Somerset, Pa
    Posts
    608
    #10
    Like I posted earlier Waymire. Great company.
    2019 Nitro Z19
    200 HP Mercury Pro XS 4s

  11. Member
    Join Date
    Jul 2016
    Location
    Monroe, NC
    Posts
    79
    #11
    Thanks