Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    Aug 2021
    Location
    sevierville tn.
    Posts
    3

    721 pro xp props?

    Wondering prop I should run on my 721 I’m getting this week with v8 proxs. I’m worrying about running fury because they tend to throw blades and get bent out. Just wondering what prop will get the best performance

  2. Member
    Join Date
    Jan 2011
    Location
    DFW
    Posts
    527
    #2
    I broke my motor in this weekend and I'm running a 24p fury. After break in I opened it up and hit 73.5 at 5800 rpm. It had more, I'm still learning the differences between the 4s and 2s and where it likes the hydro jack plate and trim........and my wife was freaking out lol
    2022 Phoenix 721 / 250 Mercury ProXs / MK Ultrex
    HB Helix 12 G4N / Garmin 106sv / Livescope

  3. Member marshall256's Avatar
    Join Date
    Dec 2004
    Location
    Hurley, MS
    Posts
    3,323
    #3
    24 P 3 blade Fury for me on my 2020 721 w/ 250 ProXS 4S. Best prop I've ever had. Over 100 hours and no thrown blades or other issues. I just like how this prop bites. Hard to explain, but doesn't blow out in hard turns like my Tempest Plus used to do on my old Triton. Not sure it that's a prop or hull difference, but based on how my old Triton ran with a Tempest...I've never wanted to try anything besides the 24 Fury on my 721.

  4. Member Jasonrs's Avatar
    Join Date
    May 2009
    Location
    Wixom Lake, MI
    Posts
    3,101
    #4
    24 pitch 3 blade fury here as well. So far, so good, about 40 hrs trouble free. The prop bites hard, comes out of the hole well, and lifts the whole boat very very well in my opinion. I have no real reason to try anything else. Oh and all 3 pvs vents open with no plugs. Best so far is 77.5 at 6,000 rpms in summer heat and humidity with a normal load for me. Im still amazed at the acceleration of this combo!

  5. Member Triton19x2's Avatar
    Join Date
    Jan 2010
    Location
    Rome, Ga.
    Posts
    2,678
    #5
    You are looking for 6100-6200 RPMs to get the most performance out of it. If you are running a 12" JP the 24P may work for you. I have a 10" Atlas and am running a 23 Fury 3Blade at 3.25 BP, 6100 RPMs at 74.5 loaded. I also have a 24P Temp+ that I can run at 2.75" BP, 6100, 74.5-75mph

    2019 721 ProXs 4S 250
    2B599739

  6. Member Louie's Avatar
    Join Date
    Dec 2009
    Location
    Charlotte, NC
    Posts
    1,060
    #6
    Not the same hull but I would think it to be a compariable boat. I had a 2021 Eyra and liked the lift on the 26 bravo xs with most hole plugged the best. Ran 1 mph slower than my 24/3 fury. Hole shot was the same on both props. Boat had 4 31 agms, poles, garmin tm. I wanna say it ran 76.8
    "the head, the tail, the whole damn thing"

  7. Member haus9393's Avatar
    Join Date
    Mar 2013
    Location
    Plattsburgh, NY
    Posts
    4,016
    #7
    with lithiums in rear I like the 25 fury over the 24 fury, both had similar hole shot and bite when tight turning but the 25 is faster by about 2mph on my 721. If I had agm batteries the 24 would probably be my choice. IMO have both one for heavy loads one for light loads. Always should have a spare in the boat as you never know what will happen.

    2023 Ford F150 XLT Super Crew 2.7L Ecoboost FX4
    2021 Phoenix 721/ Mercury 250 ProXS 4s
    HDS16 Pro- Solix15 : Console
    HDS16 Pro W/AT - Garmin 126 W/ lvs34 - Solix12/ 360 : Bow
    Dual 10' Blades/ Lowrance Ghost/ Bobs Hydraulic Plate
    225ah cranking / 100ah trolling. Ionic/Relion lithium

    MLF Invitationals Angler
    Instagram @brettcarnright

Tags for this Thread