Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Oct 2021
    Location
    Beech Bluff, TN
    Posts
    2

    200 HPDI phase III Javelin 400 Best props

    Hello, i have a 400 TE Javelin with a 200 HPDI phase III kit and wandering if i can get some advice on props and jackplate setting. have been running a 27 T1 up to 71 mph at around 5600 rpm ( not the max rpm but my driving ability stopped at 5600). and recently tried a fury 27 3 blade the fury doesnt have enough lift for my boat. is there another good prop option for this setup. motor is currently at 3 inches below pad. started at 3.5 and have been coming up slowly

  2. Member
    Join Date
    Oct 2018
    Location
    Royal,AR
    Posts
    71
    #2
    I would try a tempest plus in 27 pitch. It will get better bow lift than the t1 unless it has been modified. Would also try raising to 2.5 ptp and watch your water pressure. Depends on which 200 you have, the small block, 3.1 liter or the 3.3 liter as to how well it will run with the mods.
    Nick McDaniel

  3. Member
    Join Date
    Oct 2021
    Location
    Beech Bluff, TN
    Posts
    2
    #3
    thanks for the advice i will try the tempest and see how it runs. My engine is the 3.3l HPDI when i learn to drive it the boat should be upper 70s