Okay guys,,,,my battery lid cover on my Ranger xt397 boat needs either fixing or replacement,,,,what do you guys do when these need fixing? It’s a fiberglass type and the cover crushed down on it as well as the lift stabilizer tore off of it,,,,do they make these in aluminum? Inquiring minds need to know…..
Pictures, Pictures, Pictures, please........
If you're on facebook look up Ranger Mike. He is great
2019 Phoenix 721 ProXp
2019-250 H.P. Mercury ProXs 4 Stroke V8 Serial# 2B531797
Remove the carpet. Pop rivet a sheet of aluminum to the bottom and re attach carpet. Where the stabilizer tore through, back up bracket with strip of aluminum bar from hardware store using pop rivets.
The backing of aluminum would work if the corner didn’t get crushed down already,,,,but it’s a problem now
Pull a mold off it and build a new one, simple.
2023 SCB 20EF
2023 SCB CC 210LR
How about putting the aluminum sheet on the top of the fiberglass lid?
I would just use contact cement to glue the aluminum down to the cover and then put the rug over this.
I would file the edges , so they are not sharp so it doesn't cut into the rug.
Seems to me, this would work
1998 Triton TR-20, 2017 Evinrude 150HO
Ranger Mike hooked me up,,,,thanks guys
Reply With Quote