Has anyone replaced the logos on their seats? According to the above "sticky" it appears Llebroc made the seats, but their website didn't have anything. My seats appear to have the Champion logo sewn in, but the inner part is flaking off. It looks terrible! Any help would be appreciated.
2005 Champion 198 DC Elite
2005 Mercury Optimax-225hp (Serial#1B073011)
You have to call them to order them. I also think Carol at C&O has them.
Domednumbers.com has them
2009 ELITE 210
The seat decals?Originally Posted by BILL LO
I replaced the decals on my Lebroc seats. I called Lebroc and ordered them.
GETFISHED !!!
I called Carol at C&O Marine and she had them in stock. She also sent me the directions on how to remove the old ones. You have to heat them to get them off, then get rid of the glue residue, prior to putting the new ones on.
2005 Champion 198 DC Elite
2005 Mercury Optimax-225hp (Serial#1B073011)
That sounds right. Removing the old adhesive is critical. I think I used a product called Goo Gone. It took a while and plenty of elbow grease . My new ones have been on about 3 years and so far so goo. Prep is the key.
GETFISHED !!!
yep Reggie their pressure sensitive
2009 ELITE 210
I’m with Reggie. I had no idea Domednumbers would have seat decals for Champions.
I just ordered new ones from llebroc. They made it a point to tell me they install them on the vinyl before assembling the seat so im cautiously optimistic it will go well.
They iron on and you need to have a thick paper bag between the decal and iron. DO NOT OVERHEAT - the outer layer of the seat will melt in a sec!
2008 ChampioN 198 / 225 Opti ProXS! 1999 187 DC Elite / Merc 175 efi & 1989 184 DCR /Merc 175 xri
This is correct. Carol at C&O Marine sent me directions for installation and it includes using an iron on the lowest setting with a brown paper bag doubled over. Place thhe bag between the iron and the seat. Be careful!
2005 Champion 198 DC Elite
2005 Mercury Optimax-225hp (Serial#1B073011)
Reply With Quote
