Folding tongue flex

[MIZ-ZOU]

they must have allowed for ware on the new ones, cant hardly get the pin out

It will wear, Andy. My 2021 will celebrate its first Bday in 2 weeks () and it already has some slop in it.

[Champ]

Phoenix doesn’t make the trailer and marine master makes trailers for a lot of different boat manufacturers

[Champ]

Ran another ground from there ground to the marker light ground haven’t had any more problems

[bassm1n]

My 2019 got a little loose and I just tightened the nut on the pin. Seems to have a sweet spot. Mine has been to Florida a few times and still ok. But I agree, the design sucks.

[Champ]

You need to run the ground wire from the factory ground back to the marker light ground

[Champ]

No problem with my 15

[davidsa]

My 2015 has the ground wire attached in front of the joint and it does mess with the grounding. They must have corrected that later. I added a jumper wire connecting the two pieces and now my lights don't flicker when I go over bumps.

I had a 2014 losing signal and the issue was the loose joint in combinatin with NO wire connecting front to core trailer. Dealer added a wire between the two and appears resolved problem I don't notice much other then this on my trailer.

[Hoytman28]

AMEN! One would think that spending all that money on a nice rig that the trailer would follow suit. I am not 100% satisfied with my Marine Master Trailer either.

[rakkc]

Does marine master build to the specifications/requirements set by Phoenix? If so the burden should be on Phoenix to demand a better quality product.

[Basskicker907]

Check for corrosion at the tongue. If you take a wire brush and clean up the rust you shouldn’t have any issues with ground.