Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Sep 2011
    Location
    Brisbane, Australia
    Posts
    99

    Oznium LED Install 618

    Spent the weekend installing Oznium lights in the bird.

    I installed total 16 11mm 3W Stainless LED Bolts in RED on the deck.
    8 on the front deck,
    4 in the cockpit & 4 on the back deck.
    All wired through a Off/On/On/On switch (Same as livewell pump out)
    So I can have the deck & cockpit switched separately, also going through an Oznium Dimmer.

    Also wired in 4 Warm White LED Bolts into the cockpit, tied into the existing lights.

    In the hatches I installed 20" slimline Oznium light bars in the rod lockers, main hatch and bilge.
    Installed 2 small LED modules in the rear storage hatches behind the seat.
    Sorry don't have pictures of any of this.
    Attached Images Attached Images

  2. Member
    Join Date
    May 2018
    Location
    Kansas City
    Posts
    1
    #2
    For the ones on the deck, how did you get to the back side to tighten the bolts?

  3. BBC SPONSOR / PHOENIX MOD DREWTICK's Avatar
    Join Date
    Mar 2014
    Location
    Vass, NC
    Posts
    7,827
    #3
    Quote Originally Posted by Mokan_anger View Post
    For the ones on the deck, how did you get to the back side to tighten the bolts?

    if you use a metric drill bit there is no need for the nut, you can just use silicone, they fit very tight
    Drewcraft Specializes in Lithium Batteries and Chargers, We carry all Brands of Trolling Motors and Graphs, Minnkota, Lowrance, Garmin, Motorguide
    910-722-0001 call or text
    info@drewcraft.com