good morning, sorry for my english.
I have an Optimax 225 my 2005 serial 1B161650
I can no longer exceed 5000 rpm.
I measured the pressures in the rails:
air: 70
fuel: 80
idle is normal
what should i check?
good morning, sorry for my english.
I have an Optimax 225 my 2005 serial 1B161650
I can no longer exceed 5000 rpm.
I measured the pressures in the rails:
air: 70
fuel: 80
idle is normal
what should i check?
Double-check those air and fuel pressures. They should be 80/90 (and if they are not, you'll need to address that).
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
tested by official mercury mechanic with original double pressure gauge. advised me to try a new compressor. Don what do you say?
Did he pinch off the air dump line to see if the compressor was capable of PRODUCING pressure?
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
I tried another compressor this morning. Always low pressure.
pressures remain stable after shutdown.
could it be the fuel pumps?
No. Need to get someone that has the correct tool for Air Regulator to pull it down and inspect for either a Broken Spring, OR the set-screw perforating the spring CUP.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor