1989 206 with a 200hp vmax hpdi 2.6L
Running a 24 tempest.
Here is my question……. My motor was set at about 4 inches prop to pad. I was maxing out at about 61-62mph and spinning 5500-5700 rpms. I raised the engine this week to the last higher setting putting me at about 3.5 inches prop to pad. I was still getting 61ish as my top speed, but could spin it at anywhere from 5500-6100 rpm.
I am thinking I need to go up a pitch to a 25. Thoughts?
Thanks