Fulton Jack on 920/921 Elite

[rgbtr196le]

Can someone provide me with the model number, name, and weight capacity of the Fulton winch that is installed on 920/921 Elite trailers? Thank you very much.

[rudapa]

F2 1,600 lb

[rgbtr196le]

Are these jacks welded or attached to the trailer with mounting brackets?

[rudapa]

3 bolts - easy to swap

[TohoRookie]

Mine has a little play in it, kind of makes the coupler tough to get off the ball, has anyone else seen this?

[laposta28]

I’ve had 3 Phoenix boats and the Fulton Jack after a couple years has given me problems. Currently have a 2018 921 ProXP and the Jack is getting nearly impossible to crank and slips. If you search “Fulton F2 maintenance/problems” there’s threads that go back to 2013 with the same problems. Sorry to hijack the post but I saw the title and it reminded me I need to unfortunately order a new one I’ve been putting off. Had to buy a new on on my last Phoenix as well after a couple years.

[Meleagris1]

Would recommend upgrading to the two stage winch.

[rudapa]

I had issues with the 721 coming in under the bow, you really had to jump that sucker on the trailer. Marine Master sent me shims that improved loading but still it required me to "jump" the bow over the roller. I ended up short and used the "XLT" winch a fair amount. It did strip out after 9-years.

Fast forward to the new 921 and I have to give credit to Marine Master on the trailer to boat fit for loading. I can put the trailer in the water with the front fender steps submerged and nearly idle the bow hook right on to the bow roller. I can't imagine the 1,600 lb F2 winch having any work to do. Refreshing.............

I should have replaced the winch on my 721 with a 2K 2-stage and made my life easier.

[bassm1n]

Are we talking winches or trailer jacks here?