Mine came out of the holder on the freeway over the weekend. Luckily it fell into the bottom of the boat and stayed. Who sell the little holders to keep it from coming out?
Mine came out of the holder on the freeway over the weekend. Luckily it fell into the bottom of the boat and stayed. Who sell the little holders to keep it from coming out?
I really don't want to have to take it off/on every time.
Some guy on Facebook and eBay makes a metal piece that holds them in place. For what they cost they are well worth it. Mine came out going down the lake and almost broke my nose last year and I am always always always always certain to hear it click twice when putting it in.
Those wont fit the Ultra units, its only the Echomap Plus units. Now i did see on Facebook where a guy used a cotter pin on the cradle for 10"/12" Ultra units. If i think about it, i'll post a pic this evening on what he did.Originally Posted by froggerbass
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS
I use a big rubber band..
Dont take credit for this one but saw it facebook.....they used a cotter pin.
On this pic i also saw where they drill a small hole where the red "dot" is and use a smaller cotter pin that will fit........also the red circle i have, check yours to make sure they arent broken.
YOU are not entitled to what I have earned!!!!!
Now I got to go run out and buy a cotter pin
that's the best fix I've seen for the ultras
"The handicapped angler"
I drilled a hole that a small nail would snuggly fit that prevents the latch hinge from rotating.
This is what I did.
20210924_135651.jpg
2018 G3 Sportsman 17
2018 Yamaha F90
Garmin Ultra 106sv bow/console
Ionic lithium batteries
Like that idea, small pin is a little less in your face but gets the job done!
it takes 10-15 seconds at most to connect /disconnect -simple !
Reply With Quote