I am not getting high speed depth readings from the HB MSI transducer, so I need to install an in-hull transducer with the Y split cable. Can anyone tell me where their in-hull TD is located and have had good results?
I am not getting high speed depth readings from the HB MSI transducer, so I need to install an in-hull transducer with the Y split cable. Can anyone tell me where their in-hull TD is located and have had good results?
That's a tough one. Probably not going to find many that have an in-hull transducer on an aluminum boat, or that are successful that is. There are only a couple brands that make an in-hull TD for aluminum.(Vexilar/AlumaDucer, Hawkeye). And not sure if they would even be compatible with your HB unit. You might be better off adding a skimmer TD for holding bottom at speed while on pad.
Good point. I didn't think about the in-hull not working for aluminum boat. Just curious if anyone is getting depth readings from their MSI transducer at higher speeds?
Where is your transducer mounted? Pics? Is it level?
I will have to get pic this afternoon but its mounted under the "step" on the port side.
You will need a "Y" cable and mount a 2D transducer on the back. This will work seamlessly with your boat. Mine does!
2020 VEXUS 1880 Victor Red
Merc 115 HP Pro XS
Minn Kota Ultrex 80 I-Link MDI
Helix 10 MEGA+ MSI
Helix 9 x 2 MEGA+ MDI
Live Image FFS
2021 Aluminum Trailer
10' Talons w/sandwich brackets