Looking for somebody's old trailer jack

[Oprod]

I know many of you have removed and replaced the under mounted jack with a replacement. I'm looking to buy your used jack. My trailer is circa 2005 to 2008. Z series . My wheel assembly fell off and the manufacturer doesn't seem to sell the bracket that holds the wheel onto the jack.

[KYRANGERMAN]

Is it like this one?
JACK 3.jpg

I replaced mine with a dual wheel one. It's 21 years old and by all means, not new, but it still works. Let me know if you're interested.

[Oprod]

No mine is the jack mounted along the centerline of the trailer and folds up inside the frame. Thank you though for the reply.

[wmitch2]

I have a 2015 with the center Jack but I use a side mounted Fulton duel wheel instead. What part do you need ?

[Ranger519VS]

Item K on this list

https://www.dutton-lainson.com/prodd...php?prod=6460A

[Oprod]

Pm sent wmitch2, thanks.

‘ranger 519vs the picture you sent is from a side mounted wheel, mine is a center mounted wheel, while it seems it should be the same apparently it’s not. The picture you sent has a bolt going through the wheel bracket into the jack. My jack has a stud coming out of it that the bracket slips around and is secured with a nut. Thank you though.

[wmitch2]

Pm sent wmitch2, thanks.

‘ranger 519vs the picture you sent is from a side mounted wheel, mine is a center mounted wheel, while it seems it should be the same apparently it’s not. The picture you sent has a bolt going through the wheel bracket into the jack. My jack has a stud coming out of it that the bracket slips around and is secured with a nut. Thank you though.

Look again, there is a Center Mounted Jack also. I don't use that one. I added the Fulton side mount instead.

[brucebruce]

Sent you a PM