Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Jan 2016
    Location
    Excelsior, Minnesota
    Posts
    37

    2013 Skeeter FX Wiring Issue

    My port recirculation pump isn't working. Is there a fuse somewhere or does anyone know what color wires these are around the brain box? Any info would be helpful.

    -I have a good ground

    -Switch doesn't blink

    -Tried the reset on the switch by holding it

    -Bench tested pump and is working

    -All other live well pumps and bilge pumps are working

  2. Member
    Join Date
    Feb 2009
    Location
    Shelbyville, KY.
    Posts
    720
    #2
    I had a similar problem on a ‘16FX, turned out to be the main dog leg breaker was bad. It never kicked but it was bad. If you can, check for 12v in and out of that breaker.
    Last edited by Skeeter Man; 09-19-2021 at 07:46 AM.

  3. Member
    Join Date
    Jan 2016
    Location
    Excelsior, Minnesota
    Posts
    37
    #3
    Is that one of the breakers by the brain box?

  4. Member
    Join Date
    Feb 2009
    Location
    Shelbyville, KY.
    Posts
    720
    #4
    On my boat, it’s the breaker in the back next to the main switch. There’s another breaker there also on the port side but it’s strictly for the trolling motor. I think they’re 30amp breakers.

  5. Member
    Join Date
    Jan 2020
    Location
    Oklahoma
    Posts
    1,454
    #5
    Check the Switch also FishOn!

  6. Member
    Join Date
    Jan 2016
    Location
    Excelsior, Minnesota
    Posts
    37
    #6
    I'm going to look into it again in the next few days

  7. Member
    Join Date
    Jan 2009
    Location
    Wakefield
    Posts
    375
    #7
    I have a 14 zx 20 and had the same issue. Searched for days until I found a bundle of fuses under console on the left side Of the steering wheel.

  8. Member
    Join Date
    Jan 2016
    Location
    Excelsior, Minnesota
    Posts
    37
    #8
    It ended up being the brain box