Hi All,
I have an 03' opti 200. S/n ot760115.
My issue is not the speaker itself.
When I turn the key on I get either 2 beeps, no beeps, or a crackling sounding 2 beeps. The smart craft gauge sometimes will read "horn fault". I've already replaced speaker but issue is not fixed. What do I look at next, key switch?
Last edited by Another Distraction; 09-15-2021 at 09:05 PM.
was OEM part used as replacement for warn horn/speaker
.................................................. ...the scariest thing in life is the unknown ...................................
Check the voltage at the buzzer as the problem is occurring.
$42 mercury buzzer.
voltage comes and goes at buzzer/horn. I wiggled every wire I could looking for an issue.
I'll find the "cannon-plug" next, I bet cleaning that connection fixes it
Last edited by Another Distraction; 09-16-2021 at 05:33 AM.
possible yes sir hope so because its pcm controlled
.................................................. ...the scariest thing in life is the unknown ...................................
If it was an ecm issue alarm would stay on. Mine has never stayed on.
Last edited by Another Distraction; 09-17-2021 at 06:08 AM.
Cannon plug found and all cleaned and male plugs opened up. I'll let you know if it fixed it.
The cannon plug was my issue. Works great now. Thanks BBCBoards!
.................................................. ...the scariest thing in life is the unknown ...................................
Not necessarily.Originally Posted by Another Distraction
Fortunately the cannon-plug turned out to be the problem for you (and likely there were other problems looming and waiting to rear their heads, too). Good catch!
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Reply With Quote
