Results 1 to 4 of 4
  1. #1
    Jstfish Outdoors
    Join Date
    Jun 2011
    Location
    Collinsville, OK.
    Posts
    46

    Flashing Gas Tank Keypad Light

    I have a 08 Z20 with a flashing light on the keypad and the engine will not start. The flashing light is on the gas tank switch (just changes the fuel sending to gauge). Is there a fuse or other way to check/fix this? Just got off the phone with Ranger parts and they are out of stock and cant provide a ship date for the new ones.
    Ranger Boats, Yamaha N.F.T., Lowrance Pro-Staff, Gene Larew Lures
    https://www.facebook.com/pages/Jstfi...8355876?ref=hl
    Podcast https://jstfishoutdoors.buzzsprout.com

  2. Member
    Join Date
    Feb 2008
    Location
    Stafford Ct.
    Posts
    1,138
    #2
    Did you try holding in that flashing switch for 15 seconds or so? Doing so should reset it.

  3. Jstfish Outdoors
    Join Date
    Jun 2011
    Location
    Collinsville, OK.
    Posts
    46
    #3
    Zpilot,

    thanks for the reply. Yes, I have tried the following
    -Held flashing button down for 15-20 seconds
    -Disconnected battery for 2-3 minutes
    Ranger Boats, Yamaha N.F.T., Lowrance Pro-Staff, Gene Larew Lures
    https://www.facebook.com/pages/Jstfi...8355876?ref=hl
    Podcast https://jstfishoutdoors.buzzsprout.com

  4. Member
    Join Date
    Apr 2009
    Location
    Indianapolis, IN
    Posts
    1,946
    #4
    Disconnect your battery and check all the connections on the key pad and the brain box
    under the console. Push all the connectors on hard so that they make a good connection.
    hook battery back up and see if this helps. Good luck

Tags for this Thread