New boat rigged by dealer. 93SV at console and 106sv at bow. Network cord attached where it should be. I have gone to settings/communication and I only see that unit at each one. Help?
New boat rigged by dealer. 93SV at console and 106sv at bow. Network cord attached where it should be. I have gone to settings/communication and I only see that unit at each one. Help?
What are you trying to see?? If NMEA network then yes you can see all NMEA sensors connected, but for ethernet, there is no list to look at.
What network is it??
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS
Ethernet, sorry.
With e-net you wont see a "list".....
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS
Well, something is not right. No sharing of anything right now.
Under Settings if you look under the Device List you should see all connected devices. I think the Device List also shows the software version of each one. Make sure the software is current on both units. It does on GPSMAP units. Then if you still have problems, it's probably the cable.
My wife asks if I'm going to fish every day. I can't fish every day. Some days I might be sick.
Garmin Pro Team
On both devices,select Nav Info>Manage Data>User Data Sharing
Dont know if this will bring up list but User Data Sharing has to be on to share waypoints.
Did that. Still nothing.
You may have done this but you haven't said you have. Post#6. Check and post the software version on each unit separately. Do you have a home network cable long enough to use in place of the Garmin cable. I don't recommend that for marine use, but it will do fine for testing.
My wife asks if I'm going to fish every day. I can't fish every day. Some days I might be sick.
I'll check that soon. I sure hope it's not the cable,
On my post above, i stand corrected......i thought it was just the NMEA list that showed everything, didn't realize there was an ethernet list also.....
Sorry to confuse PMantle and anyone else that read this post.
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS
Still haven't figured this out. So, if I want to test to see if I have a bad cable, can I use just any ethernet cable? We probably have some laying around the office.
2021 BassCatt Pantera II
200 Pro XS(3B056653)
Motorguide Tour Pro
Tried an office cable. Those "click" in. Worked immediately. Retried my Garmin cable. No go. Is user error common on these or can I just assume the cable is bad?
2021 BassCatt Pantera II
200 Pro XS(3B056653)
Motorguide Tour Pro
The cables are straight forward.....I'd say bad cable.....had a few of those when I had lowrance....
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS
I was playing with some configuration changes today. To make it easy, I just ran a home ethernet cable from a 942xs to the GMS10 box. Box would not come on. Went back into the garage and dug out a Garmin ethernet cable. Came on just fine. There are times that a standard ethernet cable may work for you, but it will not in every situation, unless the RJ45 connectors have the metal shield ground.
My wife asks if I'm going to fish every day. I can't fish every day. Some days I might be sick.
I guess it's time to order a new one. Man, I dread trying to run that thing.
2021 BassCatt Pantera II
200 Pro XS(3B056653)
Motorguide Tour Pro
USS Intrepid CVS-11 Helicopter Anti Submarine Warfare Squadron-3 1960-1964
When I keep my gratitude higher than my expectations I have a good day
2021 BassCatt Pantera II
200 Pro XS(3B056653)
Motorguide Tour Pro