Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Aug 2021
    Location
    Iva SC
    Posts
    3

    Cobra 201 CoolFoot pulling out of floor

    I’m in need of suggestions on how best to reattach my hotfoot to the floor. The floor is a layer of plywood with a second layer where the pedal fastens. The top layer of wood is soft. I pulled the carpet back and everything else seems solid. I’m thinking I’ll cut the top layer out with a grinder and a cutting disc. Then make sure that’s all the damage there is and maybe fasten a piece of aluminum and bolt the pedal to it.
    What’s y’all’s opinion?

  2. Member
    Join Date
    Aug 2021
    Location
    Iva SC
    Posts
    3
    #2
    I haven’t figured out the picture thing yet��

  3. Member TomM's Avatar
    Join Date
    Jun 2004
    Location
    Royersford, PA
    Posts
    2,292
    #3
    Sounds like a plan to me. Just be sure that your screws are short enough that they don't go through the bottom of the boat. :)

    Tom

  4. Member
    Join Date
    Aug 2021
    Location
    Iva SC
    Posts
    3
    #4
    Yeah that wouldn't be good