In Hull Pod Setting in Live Unit

[schinkr1]

HDS 12 Live Unit:
- Channel one, the silver tag on my in hull unit says POD No Temp M/H FR 003-26342-00. Anyone know what transducer to select in the options? Can't find anything on Lowrance's site.
- Channel two says @AI 2 Transducer 000-27930-00...I believe this is an Active Image 2-in-1 on the settings

[Basshopper]

Try PD-WBL

[NoCAL]

Correct

[schinkr1]

Thanks guys!

[Rigit]

I am in the same situation but the label on mine has 003-27930-000 for the AI-2 and the other puck says just like the one above is listed 003-26342-000. I also have a cable plugged into the ethernet port, I believe, the yellow port that might be connecting the puck and 2 in 1 together. This is on a hds7 live. I am not sure how to set these up on the hds. It came setup on mulit input but no transducers listed and only channel 1 turned on. Side imaging didn't work hardly at all so I turned on channel 2 which I found out is the 2 in 1 after pulling the unit from the dash but haven't had a chance to try it out. I set mine up like the original poster and guess want to know if it sounds correct. I am having a difficult time finding this kind of specific information.

[Team Colibri]

003-26342-000 is a PD-WBL (with 9 pin connector) and goes in the blue sonarport on HDS Live. The AI 2i1 goes in the black port.

[becomer]

12194654[/URL]]003-26342-000 is a PD-WBL (with 9 pin connector) and goes in the blue sonarport on HDS Live. The AI 2i1 goes in the black port.

what transducer do you select for the AI 2?

disregard, found it.

[jorligan]

Again, what transducer for AI 2? Cannot find it.

[NoCAL]

You don’t select an AI. It is auto selected on the Structure port.

NoCAL