I'm replacing the whole UFP A-60 unit and I can't seem to locate what size reducer fitting (brass) to use that connects the master cylinder to the brake line. This is for a Ranger Trail single axle trailer with disc brakes and I believe the brake line measures 3/16 inch.
Would anyone happen to know what size was used here?
Appreciate the help!
Last edited by GJA; 08-03-2021 at 09:13 PM.
It's not what you can take with you,
It's what you leave behind.
Finding brake fittings parts is fun right?
I went through this. Did you need a 90 degree or straight?
Look for 1/8 fittings. Be careful with threads tho as the master cylinder has 27 this but brake lines need 24 tpi
You can find these at auto part stores for pretty cheap.Screenshot_20210829-113835_Chrome.jpgScreenshot_20210827-190142_Chrome.jpg
1995 Champion 190 dcx Elite
It's a straight thru. I found a fitting as you described and it worked.
Thanks and good luck!
It's not what you can take with you,
It's what you leave behind.
Reply With Quote