Caught the side rail insert on the lift. Pulled about 18” out. How do I get it back into the rail? Thanks
Caught the side rail insert on the lift. Pulled about 18” out. How do I get it back into the rail? Thanks
rubber mallet should do the trick
1990 374V Ranger Still kickin' bass after all these years
If the insert is round,like rope,you can tap it in with a hammer. If it’s U shaped,you’ll need to insert the bottom side in the groove and use a flat blade screw driver to work the top into the top groove.
Thanks for your help. Used a heat gun to soften about 2-3” at a time. Put bottom lip in place, heated the insert and pushed the top lip into place with a large flat blade screwdriver.