BoatMate tandem axle
Don't want to change fenders- does anyone know the tire size you go to when you move from 15 inch wheels to 17 or 18?
Pretty sure the wheels are 5 on 4.5 Ford zero offset, right?
BoatMate tandem axle
Don't want to change fenders- does anyone know the tire size you go to when you move from 15 inch wheels to 17 or 18?
Pretty sure the wheels are 5 on 4.5 Ford zero offset, right?
Hank I can't say for sure but I think boatmate uses a wider fender when going with 18 inch wheels, I went with 225 15's I had to redrill fender holes and move the fender up a bit. My opinion is they look much better than the small 14's and are still trailer rubber not car tires.
BULLET 21XRS 250 SHO
Thanks AV
I ordered 15" on my 2016 when I got it, but they do use wider fenders for the bigger wheels and tires, sure glad I got the 15" wheels and tires
With the 18’s on the Boatmate trailer yes it does require wider fenders. Without wanting to change fenders you will have to stay with a 14-15” wheel setup.
Hear what yall are saying. So if I go to the larger fenders what tire size should you go with on an 18" wheel?
Can't you just go with a bigger rim with a skinny tire?
Man, let go of some that big money and order a new one....lol.
Last edited by Sleepy111; 07-31-2021 at 09:49 PM.
Brother Jason I'd just be ordering another one the exact same. Best shape 8 year old sled out there and one of the best looking. RTR baby :) 2103 21 XRD.jpg
The new 18’s that come from factory are a 18x9 wheel with 255-45-18. I’ve seen aftermarket 17’s, 18’s & 20’s using stock fenders, most use a narrower wheel to fit. It’s the width and backspace of the wheel which is critical. There was an old thread here on BBC guy used 20’s with stock fenders.
I switched mine…gotta run spacers and wide fenders “if” you go with the new 18”s. If you use the stock fenders you will have to cut the backboards out….
BULLET 20 XRD/250 Merc Sport XS
www.ncboatguy.com