225 fhlst model. New plugs . Indexed . New reeds. New fuel pump. New fuel filter. Had emm repaired couple years ago. Cleaned exhaust fitting. It idles 650 keeps dieing at idle. Runs out very strong. Compression is good on all not more than 5lb variation. Any ideas? Thank you in advance
I had that problem on a 2000 Ficht 200 and it turned out to be a problem with one of the injectors, low flowing, I sent all 6 to DFI, Technologies and they found that one had a flow problem which they repaired and all was good!
Dan Burnette - Marietta, GA
Triton 18TRX - 200 HO G2
Question... I have been looking at this unit and the throttle linkage bushings are worn smooth out. Like a 1/8 inch slop when I push down on hot foot the idle linkage at the throttle body moves side to side before it goes back. Can this effect this unit not idling well?
Fixed it with a very deep decarb. Thank you all for the help!
Reply With Quote