Results 1 to 2 of 2
  1. 07-27-2021, 02:13 PM #1
    mrxpress8567
    mrxpress8567 is offline
    Member
    Join Date
    May 2006
    Location
    Nixa
    Posts
    346

    Raker 3 blade to Bravo 4

    Anyone have experience going from Raker to Bravo? I'm running a 26p Raker now and tried a 26 bravo xs this weekend and it jumped RPMs too high (6300). I can't imagine needing a 28 but after some reading it appears could be the deal. I'm running a Lynx with a 250 G2 and no poles.

    The Raker turns right at 6k and will run a med load to 76.5 mph with good holeshot as well. The bravo 26 was awesome lift, but just too many RPMs at 6300 and around 72 mph when I lifted outof it. I ran the motor low (2.1" on the guage) with both props.
    Reply With Quote Reply With Quote
  2. John Jackson
    John Jackson is offline
    Member
    Join Date
    Jun 2004
    Location
    Flowery Branch, Ga.
    Posts
    5,990
    #2 07-27-2021, 05:27 PM
    Bravos are weak on pitch. You could have it worked to a 27, but a 28" Bravo is probably about right. You will gain more RPM's in cooler weather.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »