What cable(s) are needed to connect a Lowrance HDSLive to the Yamaha 250 SHO?
My rigging is analog gauges, not Command Link.
What cable(s) are needed to connect a Lowrance HDSLive to the Yamaha 250 SHO?
My rigging is analog gauges, not Command Link.
06 Skeeter 20i Yamaha 250 HPDI
Visit my Youtube Channel!
https://www.youtube.com/channel/UCW6p06navSpOqUn3xotG2vA
Very handy
Just had a issue where my analog gauge just started reading crazy high temp out of nowhere.
Glad i had the yamaha interface
Thanks! I looked at this cable, but wasn't quite sure.
I also had to get the extension cable to do this for my Caracal/225 SHO. My connectors are under the helm console, so I had to go from the motor around to the side of the hull where the rest of the wiring to the helm is, and ended up being a couple feet short. I got the 15 foot extension (part number 000-0119-86), just in case, but 6 ft probably would have worked. Primarily wanted to know the engine hours on my Elite Ti2, which works great!